Index
Related articles
Printing systems promote efficiency and convenience
Cembre offers a complete range of products to meet the identification requirements in the electrical field; the wide range available in the catalogue is able to meet the requirements of both large users and small consumers.
Control and automation panels
The range of Cembre products related to supply demands for control and automation panels is particularly wide
Locomotive and carriages construction
The best selection to ensure maximum performance in the wiring of train carriages.
CABLE TAGS
CodeMG-TPMF
precut 4mm push in markers, for PMF holders
SerieFLAT MG-TPMF tags are used for marking cables, conduit, tubes, conductors and components.
Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders.
Consult us for other colours.
Note: UV resistance may vary between colours.
Certificates
2011/65/EU
Laboratory Test
CEI EN 60950-1
i INDELIBILITY
Information technology equipment - Safety
Part 1: General requirements
§ 1.7.11 Durability
Compliance is checked by inspection and by rubbing the marking by hand for 15 s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with hexane.
After this test, the marking shall be legible; it shall not be possible to remove marking plates easily and they shall show no curling.
CEI EN 61010-1
i INDELIBILITY
Ed.2 equivalent to VDE 0411-1
Safety indications for electric devices for measurement, control and laboratory use
Part 1: General indications
This regulation requires that both material and the print shall withstand‚ cleaning with chemical agents commonly used in industry.
By rubbing manually by hand, without excessive pressure, for 30 seconds with a cloth soaked in the specific detergent or, if not specifi ed, Isopropyl Alcohol.
CEMBRE STANDARD
i INDELIBILITY
This test was created to simulate cleaning with chemical products commonly used on various surfaces.
By wiping with a cloth soaked in 95% Ethanol 30 times and making a visual inspection after every 10 passes.
DIN 30643
Technical characteristics Other characteristics
| Geometric shape | rectangular easy entry |
| Material | Rigid PVC |
| UL94 class | V0 |
| Precut | yes |
| Silicon free | yes |
| Min operating temperature range | -22 °F |
| Max operating temperature range | 140 °F |
Media gallery other media
